– HETIS SILVER SILICONE FOAM is a soft, antibacterial silicone foam dressing. The product is developed based on integrating Nano silver, Poly(hexamethylenebiguanide) hydrochloride (PHMB) into polyurethane foam (PU) providing highly effective antibacterial ability.

– The product has a thickness of 2.5 – 5mm (depending on the product code), 3-layer structure:

+ The upper layer (in contact with the air) is a semi-permeable PU (polyurethane film) film that prevents water, microorganisms from entering, but   still allows water vapor to escape and exchange oxygen (MVTR (moisture vapour transmission rate) ≥ 1500 g/m2.24h).
+ The middle layer is a hydrophilic PU (polyurethane foam) foam layer with high absorbent capacity (11 – 18g fluid/g dressing) and retains fluid in the dressing   to help limit the number of the dressing changes and at the same time maintain a suitable humid environment for the wound bed.
+ The lower layer (in direct contact with the wound bed and surrounding skin) is a perforated silicone layer (size 1.6 – 3.0mm) with low adhesion, gentle to the skin.

– HETIS SILVER SILICONE FOAM contains Nano Silver and highly active PHMB, which effectively antibacterial and prevents infections from external microorganisms (Effectively kills microorganisms up to 99.99% for gram-positive and gram-negative bacteria).

– HETIS SILVER SILICONE FOAM releases a concentration of silver and PHMB gradually according to the amount of fluid absorbed from the wound bed. Maintains bactericidal ability and protects the wound bed from microorganisms during 7 days of treatment.

– HETIS SILVER SILICONE Foam is soft, elastic and flexible to help patients feel comfortable when using it, without pain and sticking the dressing into the wound bed like conventional gauze.

– The product is sterilized, each piece in a separate sterile bag.

– The product is convenient, easy to use and manipulate.

  • Clean the wound bed and surrounding areas with a specialized solution. If hydrogen peroxide is used to clean the wound bed, it should be rinsed with physiological saline before placing the dressing on the wound bed.
  • Choose the dressing suitable for each location, size and shape of the wound bed.
  • Remove the dressing from the package, remove the bottom protective paper, then place the dressing in the center of the wound bed, make sure the PU Foam is in the middle of the wound bed, continue to remove the rest of the paper, gently rub the silicone layer to stick to the surrounding skin. Finally, remove the upper PE film by peeling along the blue line between the dressing.
  • Regularly follow the condition of the dressing and the wound bed.
  • The frequency of dressing changes depends on the location, type and the extent of the wound’s discharge and as prescribed by the treating doctor (up to 7 days of gauze can be used).

HETIS SILVER SILICONE FOAM is indicated for wounds of moderate depth, moderate to heavy discharge, wounds with a high risk of infection such as:

– Postoperative wound.
– Injuries due to trauma.
– Diabetic foot ulcers, foot ulcers, pressure ulcers, etc.
– Skin grafting area.
– Partial burns such as 2nd degree burns.

Indicated for external use only, local infection control with the advice of medical staff.

Products are available in different sizes, packed according to the following specifications:

Product code Thickness, mm Size, mm   Packaging
SSF-100100-L 2,5 100×100 1 piece/pack, 20 packs/box
SSF-150150-L 2,5 150×150 1 piece/pack, 20 packs/box
SSF-200200-L 2,5 200×200  1 piece/pack, 10 packs/box
SSF-090150-L 2,5 90×150  1 piece/pack, 10 packs/box
SSF-090200-L 2,5 90×200  1 piece/pack, 10 packs/box
SSF-090250-L 2,5 90×250  1 piece/pack, 10 packs/box
SSF-100100-N 4,5 100×100  1 piece/pack, 10 packs/box
SSF-150150-N 4,5 150×150 1 piece/pack, 5 packs/box
SSF-200200-N 4,5 200×200 1 piece/pack, 5 packs/box
SSF-090150-N 4,5 90×150 1 piece/pack, 5 packs/box
SSF-090200-N 4,5 90×200 1 piece/pack, 5 packs/box
SSF-090250-N 4,5 90×250 1 piece/pack, 5 packs/box